Pro HT is a universally applicable heat-resistant bio-performance material.
- Temperature resistant up to 115 ° C
- For small-volume additive manufacturing
- Thermoplastic material derived from organic compounds
- Compatibility: BigRep ONE and all FFF 2.85 mm 3D printers
Pro HT is a high temperature resistant filament for 3D printers. It offers constant temperature resistance up to 115 ° C, with very little warpage and shrinkage. Pro HT is weatherproof thanks to its UV resistance and its high strength properties.
Pro HT is a thermoplastic material that is derived from organic compounds and is biodegradable under the right conditions. CO2 neutral and environmentally friendly, it has a lower environmental impact than other fossil fuel plastics, such as ABS. Pro HT also meets all the requirements of the EU guidelines for contact with food.
For 3D printers with an open and unheated build chamber, such as the BigRep ONE, a low printing temperature is the decisive factor when it comes to producing heat-resistant prints. The BigRep Pro HT (HT = High Temperature) a high-performance filament, is an ABS alternative, that can be used in low-temperature printers without any problems.
The renewable and biodegradable resources used for the Pro HT have a very low "warp" effect, so that the different cooling temperatures of the individual layers have almost no influence on the formation of the printed object. With an optimized structure and chemical composition, the BigRep Pro HT meets the highest requirements in the industrial sector.
- 1.3 g/cm³
- Printing bed temperature
- 195° - 205°C
- Underlay temperature
- 55° - 60°C
- Softening point
- Tensile strength
- 44 MPa
- ONE / Studio / Studio G2 / Alle kompatiblen FFF-3D-Drucker